Comparative Study of Balloon Kyphoplasty and Conservative Treatment (TRAUMAA1-2-3)
|ClinicalTrials.gov Identifier: NCT00749242|
Recruitment Status : Completed
First Posted : September 9, 2008
Last Update Posted : December 16, 2014
This study will compare two treatments in acute stable traumatic vertebral fractures (types A1, A2 and A3.1 in MAGERL Classification). The two treatments are the followings:
- Conservative Orthopedic Management consisting of brace and pain medication.
- Percutaneous Balloon Kyphoplasty, a variant of Vertebroplasty, in which a balloon is first placed into the fractured vertebra and inflated with fluid in order to create a cavity. This may restore part of the vertebral height loss due to the fracture and facilitate the injection of the cement with low pressure.
The primary outcome will be the variation in the angle of Regional Vertebral Kyphosis (or, in the case of asymmetrical fractures, the angle of lateral vertebral inclination) between inclusion and one year follow-up. It will indicate if Balloon Kyphoplasty is able to restore vertebral height of the fractured vertebra better than Conservative Orthopedic Management.
|Condition or disease||Intervention/treatment||Phase|
|SPINAL Fracture||Other: orthopedic brace Device: balloon kyphoplasty||Phase 4|
There is no reported frequency of stable thoracic or lumbar fractures traumatic fractures. However, the number of cases has been evaluated to be 61,425 yearly in Europe. Types A1 and A3.1 represent 61% of this number i.e. 37,468 per year in Europe and 4,600 in France.Conventional Conservative treatment of these fractures consists of brace and pain medication. However, a growing number of surgical teams use vertebroplasty or Balloon Kyphoplasty to avoid secondary fracture displacement after brace removal which results in increased kyphosis. However no study has compared the benefit of these new techniques to conservative managementThe goal of this study is to indicate if balloon kyphoplasty is able to restore vertebral height of the fractured vertebra better than Conservative Treatment.
1. The conventional orthopedic treatment is based on The Böhler Brace which extends from the manubrium to the pubic symphysis allowing spinal immobilisation in position of lumbar lordosis. Patients wear it for 3 to 6 months. It is a non-invasive treatment. However, kyphotic spine angle may increase over time despite the brace due to spine loading .
2 . Balloon Kyphoplasty is a variant of vertebroplasty which is performed under general anaesthesia using the KyphX® System (Medtronic., Sunnyvale, California). Balloon kyphoplasty aims at restore vertebral height of the fractured vertebra using an inflatable balloon prior to inject surgical cement (PMMA) into the vertebral body to fix the fracture. It is an expensive technique costing around 4,000 euros for up to 2 vertebrae in the same patient. The surgical technique for the procedure has been described by Lieberman and al: A bilateral approach is chosen to insert working cannulas into the posterior part of the vertebral body through a posterior transpedicular approach. Fluoroscopy is used to insert the tools and control the procedure. With reaming tools, two working channels are created and the balloons are inserted. The balloons are available in lengths of 10, 15 and 20 mm.The two balloons(one on each side) should ideally be centered at middle height between the superior and inferior endplates and in the anterior two-thirds of the vertebral body. Balloon placement into the vertebral body is checked using radiopaque markers at the two extremities of the balloon. Once inserted, the balloons are inflated using visual, volume and pressure control to create a cavity. Inflation is stopped when one of the following inflation endpoints is reached: pressure raised over 400 psi, balloon contacts one of the cortical bone of the vertebra or reaching maximal balloon inflation volume. The balloons are then deflated and removed. The mean balloon inflation volume is 2 to 3ml. The Bone Filler Device, filled before with 1.5 ml of polymethylmethacrylate (PMMA), is then advanced through the working cannula towards the anterior part of the cavity and cement is slowly extruded by a stainless steel stylet, acting as a plunger. When the amount of cement from the first Bone Filler Device is delivered in the cavity, it is removed and another Bone Filler Device is advanced through the working cannula. This step is repeated till a complete fill of the cavity is obtained. The same procedure is repeated through the other working cannula at the contra-lateral pedicle. Filling of the cavity with highly viscous PMMA is performed under continuous fluoroscopic control.
|Study Type :||Interventional (Clinical Trial)|
|Actual Enrollment :||41 participants|
|Intervention Model:||Parallel Assignment|
|Masking:||None (Open Label)|
|Official Title:||Prospective Randomized Study Comparing Balloon Kyphoplasty and Conservative Treatment in Acute Traumatic Vertebral Fractures, Types A1, A2, AND A3.1 According to the Magerl Classification (STIC 3)|
|Study Start Date :||December 2007|
|Actual Primary Completion Date :||June 2012|
|Actual Study Completion Date :||June 2012|
conventional orthopedic brace with antalgic treatment
Other: orthopedic brace
antalgic drugs and orthopedic brace
Other Name: böhler brace
balloon kyphoplasty introduction of balloon into the vertebral body, inflation of the balloon which creates a cavity, then balloon is deflated and removed , then introduction of the cement into the cavity.
Device: balloon kyphoplasty
introduction of balloon into the vertebral body, inflation of the balloon which creates a cavity, then balloon is deflated and removed , then introduction of the cement into the cavity.
- The primary outcome is the variation of the angle of Vertebral Kyphosis or, in the case of asymmetrical fractures, the angle of lateral vertebral inclination between inclusion and one year follow-up examination [ Time Frame: 1 year ]
- Pain evaluation using a visual analogic scale [ Time Frame: J-20 à J-7 / J6 / J45 /J90 /J180 / J360 ]
- questionnaire for back pain evaluation : Eifel [ Time Frame: J-20 à J-7 / J6 / J45 /J90 /J180 / J360 ]
- Quality of life evaluation (SF 12). [ Time Frame: J-20 à J-7 / J6 / J45 /J90 /J180 / J360 ]
- Analgesics intake according to the WHO classification (Classes 1, 2 and 3). [ Time Frame: J-20 à J-7 / J6 / J45 /J90 /J180 / J360 ]
- Regional spine Kyphosis angle and global thoracic and lumbar Kyphosis angle [ Time Frame: J-20 à J-7 / J6 / J45 /J90 /J180 / J360 ]
- Changes in anterior, mid and posterior vertebral heights of the treated vertebral body [ Time Frame: J-20 à J-7 / J6 / J45 /J90 /J180 / J360 ]
- Changes in height of the intervertebral disc spaces adjacent to the treated vertebra [ Time Frame: J-20 à J-7 / J6 / J45 /J90 /J180 / J360 ]
- Number of new vertebral fractures occurring during the one year follow-up period. [ Time Frame: J-20 à J-7 / J6 / J45 /J90 /J180 / J360 ]
- Cost evaluation in a sample of 10% of patients randomly selected including the following costs : o Intervention cost.o Medical treatment costs o Consultation costs. o Hospitalization cost o Complication costs [ Time Frame: J-20 à J-7 / J6 / J45 /J90 /J180 / J360 ]
- Follow-up of anterior, median and posterior height of the treated vertebral body, obtained by making an average of all measurements, on 3 cuts tomodensitometry (TDM) on the sagittal level : lateral right, median and lateral left [ Time Frame: preoperative, at J6 and at J360 ]
- Intensity of signal with T2 sequence [ Time Frame: preoperative and at J360 ]
Please refer to this study by its ClinicalTrials.gov identifier (NCT number): NCT00749242
|Hopital LARIBOISIERE Service de Radiologie Ostéo-Articulaire|
|Paris, France, 75010|
|Principal Investigator:||Jean-Denis LAREDO, MD, Pr||AP-HP Assistance Publique- Hôpitaux de Paris|