Trial record 1 of 2 for:    Open Studies | "Pit and Fissure Sealants"
Previous Study | Return to List | Next Study

Fissure Sealant Retention Trial (FSRT)

The recruitment status of this study is unknown because the information has not been verified recently.
Verified March 2009 by Aga Khan University.
Recruitment status was  Recruiting
Sponsor:
Information provided by:
Aga Khan University
ClinicalTrials.gov Identifier:
NCT00873990
First received: April 1, 2009
Last updated: NA
Last verified: March 2009
History: No changes posted
  Purpose

The aim of the investigators study is to compare how two different bonding agents affects retention in a preventive dental procedure of pit and fissure sealant. This study will help in deciding whether the self etch bonding agent requiring less steps in completion is as effective as the total etch bonding agent requiring multiple steps in fissure sealant placement.


Condition Intervention Phase
Fissure Sealant Loss
Other: Total etch bonding agent (5th generation)
Other: Self etch (7th generation ) bonding agent
Phase 2
Phase 3

Study Type: Interventional
Study Design: Allocation: Randomized
Endpoint Classification: Bio-equivalence Study
Intervention Model: Factorial Assignment
Masking: Double Blind (Subject, Outcomes Assessor)
Primary Purpose: Prevention
Official Title: Split Mouth Clinical Trial of Fissure Sealant Retention With Self Etching and Total Etch Bonding Agent

Further study details as provided by Aga Khan University:

Primary Outcome Measures:
  • fissure sealant loss [ Time Frame: 3months ] [ Designated as safety issue: No ]

Secondary Outcome Measures:
  • fissure sealant loss [ Time Frame: 6months ] [ Designated as safety issue: No ]

Estimated Enrollment: 93
Study Start Date: January 2009
Estimated Study Completion Date: October 2009
Estimated Primary Completion Date: July 2009 (Final data collection date for primary outcome measure)
Arms Assigned Interventions
Active Comparator: 1
application of total etch bonding agent ( 5th generation) for placement of resing based pit and fissure sealants.
Other: Total etch bonding agent (5th generation)

Selected teeth would receive prophylaxis with pumice using prophylaxis brushes for 20 seconds. The teeth will be isolated with cotton rolls before application of bonding agent. The tooth selected for etch and rinse bonding system (two step bonding agent) will be treated with 37% phosphoric acid (Total Etch Ivoclar Vivadent) for 15 seconds followed by rinsing for 30 seconds and then drying with air syringe till frosty white appearance is achieved.

Adper Single Bond 2 (3M ESPE) will be applied to occlusal fissure using applicator brushes followed by curing for 10 seconds. Clinpro(3M ESPE) fissure sealant will be applied to pits and fissures and then light cured for 20 seconds.

Other Name: Adper Single bond 3M ESPE
Experimental: 2
Self etch bonding agent (7th generation) application for placement of resin based pit and fissure sealant
Other: Self etch (7th generation ) bonding agent
For teeth selected for application of self etching bonding agent (Adper Easy Bond 3 M), the bonding agent will be applied to occlusal surface with microbrushes and will be left undisturbed for 20 seconds followed by air drying for 5 seconds and then will be light cured for 10 seconds. Fissure sealant (Clinpro 3M ESPE) will be applied in a similar manner as for etch and rinse group and light cured.
Other Name: Adper Easy bond 3M ESPE

Detailed Description:

Pit and fissure sealant have been hailed as a highly effective preventive dental treatment since it was introduced first in late 1970s . Sealants have traditionally placed using two step bonding agents based on acid etching with phosphoric acid followed by drying and bonding agent application and curing. Multiple steps in application of bonding agents have been associated with more chances of procedure errors and prolonged procedure time. The newer bonding agents are based on minimizing the number of steps involved with introduction of self etching bonding agents.6th generation adhesives are based on mixing of two components where as the 7th generation adhesives are based on no mix technique.

Previous studies on fissure sealants have focused on conventional etch and rinse bonding agents, there are only few published studies on effectiveness of the self etch bonding agents in retention of fissure sealants in vivo that have targeted the 6th generation adhesive. Feigal and Quelhas reported equivocal results with use of self etching bonding agents in comparison with etch and rinse bonding agents, but their study was limited by smaller sample size. Similar study was conducted by Burbridge which was based on short clinical follow up of 6 month evaluation where Xeno III by Dentsply (6th generation bonding agent) was compared with Prime & Bond (Dentsply). Another study by Venker et al on Adper Prompt L Pop in a school sealant program was based on retrospective review of cases. In light of published literature on (6th generation) self etch bonding agent has been found to be equal or inferior to total etch bonding agents (5th generation). There are no published clinical trials on the retentiong rate comparison of total etch bonding agent with no mix slef etch bonding agents in pit and fissure sealant.

Our study is based on comparison of effectiveness of single step bonding agent (7th generation adhesives) versus two step bonding agent in fissure sealant retention.

  Eligibility

Ages Eligible for Study:   6 Years to 25 Years
Genders Eligible for Study:   Both
Accepts Healthy Volunteers:   Yes
Criteria

Inclusion Criteria:

  • Fully erupted bilateral first or second permanent molar teeth.
  • Patients requiring fissure sealant due high caries risk.
  • Age group 6-25 years.
  • Occlusal fissures of molar teeth.

Exclusion Criteria:

  • Cases where one of the molar on either side is grossly carious or restored
  • Third molars
  • Uncooperative patients
  • Molar teeth with antagonist tooth not present or extracted
  • Mentally and physically handicapped patients
  Contacts and Locations
Choosing to participate in a study is an important personal decision. Talk with your doctor and family members or friends about deciding to join a study. To learn more about this study, you or your doctor may contact the study research staff using the Contacts provided below. For general information, see Learn About Clinical Studies.

Please refer to this study by its ClinicalTrials.gov identifier: NCT00873990

Contacts
Contact: Nadia Aman, BDS (92)214930051 ext 5011 nadiaaman79@hotmail.com, nadia.aman@aku.edu
Contact: Farhan R Khan, FCPS (92)214930051 ext 1014 farhan.raza@aku.edu

Locations
Pakistan
The Aga Khan University Hospital Recruiting
Karachi, Sindh, Pakistan, 3500
Contact: Nadia Aman, BDS    (92)214930051 ext 5011    nadia.aman@aku.edu   
Principal Investigator: Nadia Aman, BDS         
Sub-Investigator: Ali K Khuwaja, FCPS         
Sub-Investigator: Farhan R Khan, FCPS         
Sponsors and Collaborators
Aga Khan University
Investigators
Principal Investigator: Nadia Aman, BDS The Aga Khan University Hospital
  More Information

No publications provided

Responsible Party: Dr Nadia Aman, The Aga Khan University Hospital
ClinicalTrials.gov Identifier: NCT00873990     History of Changes
Other Study ID Numbers: 07GS028SUR
Study First Received: April 1, 2009
Last Updated: April 1, 2009
Health Authority: Pakistan: Research Ethics Committee

Keywords provided by Aga Khan University:
fissure sealant
self etch
total etch

ClinicalTrials.gov processed this record on October 22, 2014